Product Center

APL3000 Control Room OLT

4 OLT ports+4 Gigabit SFP slots+4 Gigabit TX ports
  • Overview
  • Specification
  • Ordering Information
APL3000 Control Room OLT devices are the core part of passive optical network. APL3000 supports redundant EPON network, Gigabit network and content exchange. Any two ports can establish a self-recovery ring, meanwhile, APL3000 supports multiple independent self-recovery rings. Possible ring networks are: double optical fibers, single optical fiber, twisted-pair line, or any combination of 10G, Gigabit or megabit self-recovery rings. With hardware-based algorithm, the patented MRD-RING® (MRDcom Real-Time Ring) technology ensures less than 5ms self-recovery time of every node and less than 50ms self-recovery time of the network. All EPON ports can realize "1+1" all-fiber protection network with less than 50ms switching time. High backplane capacity ensures the rapid and effective network traffic exchange for multiple layers, the EPON ports can form large-scale and high-density redundant PON access applications. APL3000 series utilize FPGA and CPLD dynamic reconfiguration and replicate programming technology, support multiple redundancy mechanisms such as link aggregation and resilient connection for high stability and reliability, various key operating parameters can be monitored locally and remotely. 
Features and Benefits
● High-performance and high-reliability industrial OLT, support up to 4 PON ports
● Powerful routing and switching functions
● All PON ports support backbone fiber redundancy protection with less than 50ms switching time
● All UNI ports support MRD-RING®, MRP, EAPS and traditional xSTP with less than 50ms switching time
● Realize "1+1" protection bus or tree network topology with ATS series industrial ONU devices
● Bidirectional high-bandwidth services can be realized on a single fiber with a downlink/uplink rate of 1.25Gbps
● Support QoS mechanism based on ITU-T Y.1291, including priority labeling, queue scheduling, flow shaping, congestion limit and cache management
● SLA parameters can be regulated for different users and services, such as delays, jitters, guaranteed bandwidths and maximum bandwidths
● Support DBA mechanism for each ONU's uplink bandwidth allocation and rate limit
● Support multiple efficient security mechanisms, including VLAN isolation, port protection, MAC binding, IP binding and port rate-limit
● Support queue and flow control technologies for multi-service integrations
● Rich OAM and expanded OAM functions, including configuration, alarm, performance monitoring, fault isolation and security management
● Support alarm relay output and dying gasp remote alarm function
● 1U rackmount and fanless design, up to class 4 electromagnetic compatibility
● Protection grade: IP40
Software Functions
Management Mode Web, serial port, STD-17 MIB-II, STD-58 SMIv2, STD-59 RMON, STD-62 SNMPv3, SNMPv2c, SNMPv1, RFC2668 MAU, RFC2925 Ping MIB, MRD Private MIBs
Diagnosis Mode Indicator light, journal file, relay, RMON, port mirroring, TRAP
Redundancy Backbone protection, 1+1 full protection, MRP, MSTP, RSTP, STP, port trunking, MRD-RING®
Others 4K VLANS, IPv4/IPv6 multicast, Storm  Control, MC/BC protection, support Jumbo Frame

  Technical Specification
  Standard IEEE 802.3 CSMA/CD method and physical layer specifications
  IEEE 802.3ah Ethernet in the First Mile
  IEEE 802.3az Energy Efficient Ethernet
  IEEE 802.1p Priority Queuing
  IEEE 802.1q VLAN tagging
  IEEE 802.1d Spanning Tree Algorithm
  IEEE 802.1w Rapid Spanning Tree
  IEEE 802.1s Multiple Spanning Tree
  IEEE 802.3ac VLAN Tagging
  IEEE 802.1x Authentication
  IEEE 802.3ad Link Aggregation
  IEEE 802.3x Flow Control
  IEEE 802.3 Ethernet
  IEEE 802.3u Fast Ethernet
  IEEE 802 Networks
  RFC 768 UDP
  RFC 791 IP
  RFC 792 ICMP
  RFC 793 TCP
  RFC 826 ARP
  RFC 854 Telnet Client & Server
  RFC 951 BootP
   RFC 862 Echo Protocol
   RFC 863 Discard Protocol
  RFC 867 Daytime Protocol
  RFC 868 Time Protocol
  RFC 904 Exterior Gateway Protocol Formal Specification
  RFC 919 Broadcasting Internet Datagrams
  RFC 922 Broadcasting Internet Datagrams in the Presence of Subnets
  RFC 1024,1035 Domain names
  RFC 1027 Using ARP to Implement Transparent Subnet Gateways
  RFC 1042 Standard for the Transmission of IP Datagrams over Networks
  RFC 1058 RIP 
  RFC 1059, 1119 NTPv1/2 
  RFC 1112 IGMP 
  RFC 1122 Host Requirements
  RFC 1166 Internet Numbers
  RFC 1191 Path MTU Discovery
  RFC 1256 ICMP Router discovery protocol
  RFC 1267 A Border Gateway Protocol 3 (BGP-3) 
  RFC 1305 NTPv3
  RFC 1332 The PPP Internet Protocol Control Protocol (IPCP)
  RFC 1334 PPP Authentication Protocols (specifies PAP)
  RFC 1388 RIP  Version 2  Carrying  Additional Information 
  RFC 1403 BGP OSPF Interaction 
  RFC 1519 CIDR (Classless Inter-domain Routing) 
  RFC 1542 Bootstrap Extensions & DHCP
  RFC 1548 The Point-to-Point protocol
  RFC 1619 PPP over SONET/SDH
  RFC 1638 PPP Bridging Control Protocol (BCP)
  RFC 1661 The Point-to-Point Protocol (PPP)
  RFC 1662 PPP in HDLC-like Framing
  RFC 1701 Generic Routing Encapsulation
  RFC 1702 Generic Routing Encapsulation over IPv4 Networks
  RFC 1771 BGP4
  RFC 1745 BGP4/OSPF
  RFC 1765 OSPF Database Overflow
  RFC 1812  Requirements for  IP Version 4  Routers
  RFC 1851 The ESP Triple DES Transform
  RFC 1866 HTML
  RFC 1965 Autonomous system configuration for BGP
  RFC 1966 BGP Route Reflection
  RFC 1989 PPP Link Quality Monitoring
  RFC 1994 PPP Challenge Handshake Authentication Protocol (CHAP)
  RFC 1997 BGP Communities Attribute
  RFC 2068 HTTP
  RFC 213 DHCP Server
  RFC 2132 DHCP Options and BOOTP Vendor Extensions
  RFC 2139 RADIUS Accounting
  RFC 2236 IGMPv2
  RFC 2328 OSPF V2
  RFC 2338 VRRP
  RFC 2362 PIM-SM/DM
  RFC 2370 The OSPF Opaque LSA Option
  RFC 2439 Route Flap Damping
  RFC 2453 RIPv2
  RFC 2474 DiffServ Precedence
  RFC 2475 DiffServ Core and Edge Router Functions
  RFC 2597 DiffServ Assured Forwarding,
  RFC 2598 DiffServ Expedited Forwarding
  RFC 2615 PPP over SONET/ SDH
  RFC 2644 Directed Broadcasts
  RFC 2792 DSA and RSA Key and Signature Encoding for the Key Note TMS
  RFC 2865 Remote Authentication Dial In User Service (RADIUS)
  RFC 3046 DHCP Relay Agent Information Option
  RFC 3084 COPS-PR
  RFC 3140 PHB Identification Codes
  RFC 3222 Forwarding Information Base (FIB)
  DVMRP v3
  SSH2 Secure Shell 2
  IGMP snooping
   YD/T 1475-2006
  DL/T 814-2002
  DL/T 721-2000
  Hardware Description Backplane Bandwidth:  98 Gbps
  CPU: 600 MHz  RISC
  Switch Architecture:Store-and-Forward
  MAC Table Size: 16K
  Packet Buffer Size: 1.5M
  PON Port Rate:1.25Gbps
  Physical Characteristics MTBF:> 800, 000 hours
  Storage Temperature:-40°C~ 85°C
  Operating Temperature:-40°C~ 85°C
  Ambient Relative Humidity: 5% ~ 95% (non-condensing)
  Dimensions (W x H x L): 440mm x 44.4mm x321mm
  Protection Grade: IP40
  Weight: 3.7 KG (Maximum)
  Power Consumption: 70W (Maximum)
  Testing       Vibration:  IEC 60068-2-6
  Shock:       IEC 60068-2-27
  Freefall:     IEC 60068-2-32
  Circuit Board: Approved by IPC
  EMI:      FCC 47 CFR Part 15 Class A
                  EN55022 Class A
  EMS:       IEC (EN ) 61000-4-2, Class 4
                  IEC (EN ) 61000-4-3, Class 4
                  IEC (EN ) 61000-4-4, Class 4
                  IEC (EN ) 61000-4-5, Class 4
                   IEC (EN ) 61000-4-6, Class 4
                  IEC (EN ) 61000-4-9, Class 4
  Industrial Certification Product Safety:  CE.CB.IEC.IECEE
                  FCC Part 15 Subpart B Class A
                 IEC/EN55022 Class A
  Hazardous Area: UL/cUL1604 Class 1 Div 2 (pending)
  Transportation Industry: JT/T817-2011; NEMA-TS2  (pending)
  Rail Industry: EN50121-4
  Power Industry:  IEC61850-3;   IEEE1613 (C37.90.x)
  Shipbuilding Industry: GL 

Recommended Models
P/N Description
APL3000-PB11P444 4 OLT ports+4 100/1000M SFP slots+4 Gigabit TX ports, dual isolated power supplies (100-240V), IP40 protection grade.
APL3000-PB22P444 4 OLT ports+4 100/1000M SFP slots+4 Gigabit TX ports, dual isolated power supplies (18-60VDC), IP40 protection grade.
APL3000-PB12P444 4 OLT ports+4 100/1000M SFP slots+4 Gigabit TX ports, dual isolated power supplies (1 HV: 100-240V and 1 LV: 18-60VDC), IP40 protection grade.
APL3000-PB10P444 4 OLT ports+4 100/1000M SFP slots+4 Gigabit TX ports, isolated power supply (100-240V), IP40 protection grade.
APL3000-PB20P444 4 OLT ports+4 100/1000M SFP slots+4 Gigabit TX ports, isolated power supply (18-60VDC), IP40 protection grade.
PON Module Description
MRD-EPON-GLX Industrial OLT SFP module (a 20km transmission distance as to the 1:32 optical coupling ratio; a 10km  transmission distance as to the 1:64 optical coupling ratio; SC; TX1490nm; RX1310nm; 1.25G, temperature range: -40~85°C) 
Cable Option Description
PCORDAC-CN-15 1.5m three-core AC power cord, GB plug, 6A rated current
PCORDDC-CN-15 1.5m three-core DC power cable, 200W rated power