Product Center



TCC4100 POE Switches

16+4G Layer 2/3 Managed Switches
  • Overview
  • Specification
  • Ordering Information
TCC4100-POE series industrial Ethernet switches can be flexibly configured with multiple Gigabit and Megabyte FX/TX ports. The backplane bandwidth is up to 52Gbps. Any two ports can establish a self-recovery ring, each POE port provides up to 30W output power. TCC4100-POE supports multiple independent self-recovery rings. Possible ring networks are: double optical fibers, single optical fiber, twisted-pair line or any combination of them. With hardware-based algorithm, the patented MRD-RING® (MRDcom Real-Time Ring) technology ensures less than 5ms self-recovery time of every node and less than 50ms self-recovery time of the network. TCC4100-POE also supports MRD-RING® Media Redundancy Protocol (compliant with IEC62439) and PRP/HSR (compliant with IEC62439-3).
TCC4100-POE series utilize FPGA and CPLD dynamic reconfiguration and replicate programming technology for high stability and reliability, various key operating parameters can be monitored locally and remotely. Advanced solution, extended industrial design, and patented technologies make TCC4100-POE one of the top choices for harsh industrial environments.
Features and Benefits
● Linear switches with high performance and flexible configuration
● Support up to 52Gbps backplane bandwidth
● Redundant dual DC power inputs (44-57V)
● Support MRD-RING® network redundancy for < 50 ms recovery time
● Support MRD-RING® Media Redundancy Protocol (compliant with IEC62439)
● Support PRP/HSR redundancy for zero recovery time (compliant with IEC62439-3)
● Any two ports can establish a self-recovery ring and support multiple independent self-recovery rings
● Support up to 8 POE ports
● Support 802.3af/at compliant POE
● Each POE port provides up to 30W output power
● POE management: POE device detection, POE power management
● Support Dying gasp function and initiatively report power-down state through SNMP protocol
● Support MODBUS/UDP/SNMP remote monitoring and various mainstream OPC software
● Built-in unified MicOS real-time operating systems for all MRD™ switches
● Fanless, -40 to 85°C wide operating temperature range
● MTBF >600, 000 hours
 
Software Functions
Management Mode Web, serial port, STD-17 MIB-II, STD-58 SMIv2, STD-59 RMON, STD-62 SNMPv3, SNMPv2c, SNMPv1, RFC2668 MAU, RFC2925 Ping MIB, MRD Private MIBs
Diagnosis Mode Indicator light, journal file, relay, RMON, port mirroring, TRAP
Redundancy MRD-RING®, MRP, HSR, PRP, MSTP, RSTP, port trunking
Time Synchronization IEEE1588, SNTP
Others 4K VLANS, IPv4/IPv6 multi-cast, storm control, MC/BC protection, support Jumbo Frame
   

Technical Specification
Standard IEEE 802.3 CSMA/CD method and physical layer specifications 
 IEEE 802.1p Priority Queuing 
 IEEE 802.1q VLAN tagging 
 IEEE 802.1d Spanning Tree Algorithm
 IEEE 802.1w Rapid Spanning Tree 
IEEE 802.1s Multiple Spanning Tree 
 IEEE 802.3ac VLAN Tagging 
IEEE 802.1x Authentication 
IEEE 802.3ad Link Aggregation 
IEEE 802.3x Flow Control 
 IEEE 802.3 Ethernet 
 IEEE 802.3u Fast Ethernet 
 IEEE 802 Networks 
 RFC 768 UDP 
 RFC 791 IP
 RFC 792 ICMP 
 RFC 793 TCP 
 RFC 826 ARP 
RFC 854 Telnet Client & Server 
RFC 1191 Path MTU Discovery 
RFC 1542 Bootstrap Extensions & DHCP 
RFC 1851 The ESP Triple DES Transform 
RFC 1866 HTML 
RFC 1994 PPP Challenge Handshake Authentication Protocol (CHAP)
RFC 2068 HTTP 
RFC 213 DHCP Server 
RFC 2138 RADIUS 
RFC 2139 RADIUS Accounting 
RFC 2474 DiffServ Precedence
RFC 2597 DiffServ Assured Forwarding
 RFC 2598 DiffServ Expedited Forwarding
RFC 2644 Directed Broadcasts 
RFC 2865 Remote Authentication Dial In User Service (RADIUS) 
RFC 3222 Forwarding Information Base (FIB) 
SSH2 Secure Shell 2
 IGMP snooping 
 SNMPv1/v2/v3 
Hardware Description Backplane Bandwidth:  52 Gbps
CPU: 333MHz  RISC
Switch Architecture:Store-and-Forward
MAC Table Size: 4K
Packet Buffer Size:2MB
Exchange Rate:148, 800 pps/100M ports; 1, 488, 000 pps/1000M ports
Physical Characteristics MTBF:> 600, 000 hours
Storage Temperature:-40°C~ 85°C
Operating Temperature:-40°C~ 85°C
Ambient Relative Humidity:5% ~ 95% (non-condensing)
Dimensions (W x H x L): 130mm x 140mm x 110mm
Protection Grade: IP40
Weight: 1.3KG (Maximum)
Power Consumption: 25W (Maximum)
Testing       Vibration:  IEC 60068-2-6
Shock:       IEC 60068-2-27
Freefall:     IEC 60068-2-32
Circuit Board: Approved by IPC
EMI:      FCC 47 CFR Part 15 Class A
                EN55022 Class A
EMS:       IEC (EN ) 61000-4-2, Class 4
                IEC (EN ) 61000-4-3, Class 4
                IEC (EN ) 61000-4-4, Class 4
                IEC (EN ) 61000-4-5, Class 4
                 IEC (EN ) 61000-4-6, Class 4
                IEC (EN ) 61000-4-9, Class 4
Industrial Certification Product Safety:   CE
                IEC/EN60950-1
                FCC Part 15 Subpart B Class A
               IEC/EN55022 Class A
Hazardous Area: UL/cUL1604 Class 1 Div 2
Transportation Industry: JT/T817-2011; NEMA-TS2
Rail Industry:    EN50155; EN61373; EN50121-3-2; EN50121-4
Power Industry:  IEC61850-3;   IEEE1613 (C37.90.x)
Industrial Control Industry: UL/cUL61010 
Shipbuilding Industry: GL 

Product Naming
TCC4100– DPS1S2S3S4
D Network Management
A Unmanaged
B Layer 2 managed 
C Layer3 managed 
P Power Supply Option
W Dual inputs: 18-60VDC
H Single input: 100-240V
S1S4 Port Type & QTY
S1 100/1000M SFP slot (0, 4)
S2 100M SFP slot (0, 4)
S3 Gigabit TX port (8, G)
S4 100M TX port (8, G)
Note: “G” indicates 16 ports.
 
Recommended Models
P/N Description
TCC4100-BW0008 Managed switch, 8 100M TX ports, isolated power supply (18-60VDC), IP40 protection grade.
TCC4100-BH00G0 Managed switch, 16 Gigabit TX ports, isolated power supply (100-240V), IP40 protection grade.
TCC4100-BW0408 Managed switch, 8 100M TX ports+4 100M SFP slots, isolated power supply (18-60VDC), IP40 protection grade.
TCC4100-BH400G Managed switch, 16 100M TX ports+4 100/1000M SFP slots (combo with TX), isolated power supply (100-240V), IP40 protection grade.
TCC4100-BW4080 Managed switch, 8 Gigabit TX ports+4 100/1000M SFP slots, isolated power supply (1860VDC), IP40 protection grade.
TCC4100-CW0008 Layer 3 switch, 8 100M TX ports, isolated power supply (18-60VDC), IP40 protection grade.
TCC4100-CH00G0 Layer 3 switch, 16 Gigabit TX ports, isolated power supply (100-240V), IP40 protection grade.
TCC4100-CW0408 Layer 3 switch, 8 100M TX ports+4 100M SFP slots, isolated power supply (18-60VDC), IP40 protection grade.
TCC4100-CH400G Layer 3 switch, 16 100M TX ports+4 100/1000M SFP slots (combo with TX), isolated power supply (100-240V), IP40 protection grade.
TCC4100-CW40G0 Layer 3 switch, 16 Gigabit TX ports+4 100/1000M SFP slots (combo with TX), isolated power supply (18-60VDC), IP40 protection grade.
   
Accessories  
Installation Accessory Description
SDMFB-SM Surface mount kit, containing fixing screws
SDMFB-DM DIN mount kit, containing fixing screws
SDMFB-RM Rack mount kit, containing fixing screws
Cable Option Description
PCORDAC-CN-15 1.5m three-core AC power cord, GB plug, 6A rated current
PCORDDC-CN-15 1.5m three-core DC power cable, 200W rated power